Save up to $309.20
Horizontal Rope/Chain Series (HRC10-10)
Horizontal Rope/Chain Series (HRC10-10)
Maxwell

Horizontal Rope/Chain Series (HRC10-10)

No reviews yet

$18 Shipping - Free Shipping over $499 All across Australia

Customers Love Arnold's Boat Shop
Rated 4.2/5 based on 2,100+ reviews

42,000+ Products and Growing
The one-stop boat shop

Part Number:
The HRC10 Horizontal Series windlasses proudly follow in the highly successful footsteps of Maxwell’s previous, fully automatic rope/chain anchor winches.

Features and benefits
  • The all new HRC10 fully automatic horizontal windlass series is designed to effortlessly retrieve and deploy 8 mm (5/16”) and 10 mm (3/8”) short link chain and 14 mm (9/16”) and 16 mm (5/8”) three strand or 8-brait (plait) rope
  • The more powerful HRC10-10 can be use with 10 mm (3/8”) chain spliced to 16 mm (5/8”) three strand or 8-brait (plait) rope
  • The aesthetically pleasing above deck design, evolved from the philosophy of form follows function, encapsulates the motor and drive in a two part watertight case, saving space below deck
  • The two part case consists of a die cast, marine-grade hard anodised alloy front section and a rugged and easily removable composite motor cover aft section
  • This two piece watertight case allows for quick and easy, on-deck, routine maintenance
  • Simple ‘bolt down’ installation ensures effortless and rapid on-deck installation and set up
  • The stainless steel (AISI 316) pressure arm always exerts maximum control pressure on the rode (rope, splice or chain)
  • The new and revolutionary patented Wave Design™ chainwheel is able to accommodate a wide range of chain pitch differences, within the specified chain size diameters, suitable for use with the HRC10 Series.
  • The unique Maxwell ‘wrap around’ horizontal chainwheel ensures that more than 90° of the wheel is used, allowing greatly improved rope and chain handling compared with competitor designs
  • The HRC10 works just as effectively with all-chain rodes for those who desire the added security and holding power of an all-chain anchor system
  • The integral chain pipe and huge, through deck hawse pipe throat ensures easy entry of the rope/chain rode into and out of the anchor locker
  • Cone type clutch/brake mechanism permits manual, ‘free fall’ anchoring and emergency crank recovery of the rode and anchor if required
  • The sealed oil bath and marine-grade hard anodised, alloy gearbox provides high efficiency output drive via precision worm and wormwheel
  • Every Maxwell HRC10 windlass comes with top works, motor/gear box and dual direction solenoid. Switches and circuit breaker are available and need to be ordered separately.

    SPECIFICATIONS
    Model HRC10-10* 10 mm - 3/8”
    Maximum Pull/Lift 850 kg / 1870 lbs
    Static Hold 1500 kg / 3300 lbs
    Chain Short Link 10 mm / 3/8”
    Rope Size 16 mm / 5/8”
    Chain Speed (Anchor Retrieval) 24 m/min / 79 ft/min
    Rope Speed (Anchor Retrieval) 20 m/min / 65 ft/min
    Power Supply (DC) 12 or 24 V
    Motor (Watts) 1200 W
    Net Weight 20 kg / 44 lbs
    Hydraulic Pressure 138 bar / 2000 psi
    Hydraulic Flow 20 L/min / 5.3 USgal/min
    Net Weight - Hyd 13 kg / 28 1/2 lbs
    Non Capstan Version. Weight is 1kg/2.2lbs less than above indicated.
    *8 mm - 5/16” or 10 mm - 3/8” chainwheels can be used on either of the above models

    DIMENSIONS
    Model HRC10-8* (8 mm - 5/16”)
    A 369 mm / 14 9/16”
    B 199 mm / 7 7/8”
    C1 316 mm / 12 1/2”
    C2 225 mm / 8 7/8”
    C3 140 mm / 5 1/2”
    D 80 mm / 3 3/16”
    E (standaard deck clearance) 90 mm / 3 9/16”
    F 92 mm / 3 9/16”
    G 110 mm / 4 3/8”
    H 80 mm / 3 3/16”
    J 99 mm / 4”

    Important: Maxwell windlasses must be used in conjunction with a chain stopper or alternative snubbing device to take the load off the windlass while laying at anchor. The chain stopper and alternative snubbing system should also be used to secure the anchor in the fully raised position while under way.

    • After ordering online, you will receive an automated email confirmation containing your order details. Your order will then be confirmed within a few minutes of placing your order.

    It is our policy to ensure we deliver to our customers in a timely manner. In order to achieve this we use a range of freight companies depending on the size and weight of your order. In some instances we may use a number of carriers to get your products to you. For example, chain may come by road, some electronic equipment by air.


    Most orders are shipped within 2 - 5 Days

    Shipping rates

    Orders delivered to Australian Post Codes under $499 attract an $18.00 shipping charge.

    Orders of $499 or more ship free.*


    For Remote areas and bulky items. If the cost to send is vastly different to our standard delivery costs, someone from our team will contact you prior to dispatch to arrange further payment or to issue a refund if you are not happy with the additional charges.

    International orders will be charged at $0.00 initially and our staff will be in contact with a shipping quote. If the quote is not accepted the customer reserves the right to cancel their order and be refunded in full.

    Should you have any queries or concerns about shipping, please don't hesitate to get in touch by clicking the support button on bottom right of the page.

    Similar Products